The ND30 from Purple Professional is a rotary tool designed for professional manicure and pedicure work, on both natural and artificial nails.

Its speed can be progressively regulated from 0 to 30,000 revolutions per minute , allowing the operation to be adapted to the technique, the milling cutter and the work you are doing.

It also incorporates rotation in both directions , a feature especially useful in professional work because it allows you to select the appropriate direction of rotation according to the technique and the hand you are working with.

Up to 30,000 rpm

The speed is manually controlled by the equipment's regulator and can be adjusted up to a maximum of 30,000 rpm .

This regulation allows the lathe to be adapted to different jobs, from certain preparation and refinement tasks to the removal of technical product, always using the appropriate milling cutter and speed for each procedure.

Bidirectional rotation

ND30 allows you to select left or right rotation , making it easier to adapt the equipment to different work techniques.

It is important to use burs compatible with the selected direction of rotation, especially when using burs whose grooves are specifically designed for right-handed or left-handed users.

Compatible with universal milling cutters

The lathe is compatible with universal size milling cutters , so it can be combined with different types of professional milling cutters depending on the work you need to do.

The choice of the shape, material and abrasiveness of the bur should always be made taking into account the technique and the area on which it will be worked.

Automatic overload protection

ND30 incorporates an automatic overload protection system , designed to protect the operation of the equipment in situations of excessive stress.

It can also be used in a vertical or horizontal position , facilitating its integration into the workplace.

Key advantages

• Professional rotary tool for manicure and pedicure.
• 50W power.
• Adjustable speed up to 30,000 rpm.
• Manual and progressive speed control.
• Bidirectional rotation: left and right.
• Vertical or horizontal operation.
• Compatible with universal size burs.
• Automatic overload protection system.
• Suitable for working on natural and artificial nails.
• Designed for professional use.
  
  

Is it for you?

Yes, if you're looking for a professional rotary tool to add to your regular manicure or pedicure station and want adjustable speed, rotation in both directions, and compatibility with universal drill bits.

It is especially interesting for professionals who regularly perform technical nail services and need to adapt both the speed and the drill bit to different phases of the work.

Its 30,000 rpm allows you to work with different techniques, but remember that the maximum speed is not necessarily suitable for all procedures: the adjustment should always be made according to the milling cutter, the product and the area you are working on.

Instructions for use

1. Correctly place a compatible bur in the handpiece.
2. Check that the milling cutter is correctly secured before putting the equipment into operation.
3. Select the appropriate direction of rotation.
4. Turn on the lathe and start at a controlled speed.
5. Adjust the revolutions gradually according to the work and the milling cutter used.
6. Work using continuous and controlled movements, avoiding excessive pressure.
7. Once the service is finished, stop the lathe completely before handling or replacing the milling cutter.
   
   

Professional advice

Don't automatically operate at 30,000 rpm just because the lathe can reach that speed. The correct speed depends on the technique, the type of milling cutter, its abrasiveness, and the surface you're working on.

Excessive pressure is no substitute for choosing the correct speed and drill bit. Work with continuous, controlled movements to avoid generating unnecessary heat or putting excessive pressure on the nail.

Also pay attention to the direction of rotation . If you use milling cutters specifically designed for right-handed or left-handed users, as is the case with certain tungsten carbide cutters, you must respect the direction for which they were manufactured.

Before changing a bur, always wait until the handpiece has come to a complete stop .

Technical specifications

• Brand: Purple Professional .
• Model: ND30.
• Type: Professional electric nail drill.
• Power: 50W.
• Maximum speed: 30,000 rpm.
• Adjustable speed: Yes.
• Bidirectional rotation: Yes, left/right.
• Operating position: Vertical or horizontal.
• Compatibility: Universal size burs.
• Overload protection: Automatic.
• Use: Manicure and pedicure.
• Suitable for: Natural and artificial nails.
• Use: Professional.
  
  

Maintenance and precautions

Equipment intended for professional use. Use only with compatible milling cutters and with adequate knowledge of lathe techniques.

Keep the equipment and handpiece clean and dust-free. Burs should be cleaned, disinfected, or sterilized as appropriate after each use.

Do not manipulate or replace the milling cutter while the handpiece is in motion and avoid applying excessive pressure during operation.