The Purple Professional P3034 milling cutter is made of tungsten carbide , a material used professionally for its strength and ability to work on technical products.

It has a conical shape with a rounded tip and dimensions of 6.8 mm in diameter and 15 mm in head length.

Its red ring identifies a fine grit , suitable for jobs that require a softer and more controlled abrasion than that provided by medium or coarse grit milling cutters.

What is it used for?

This strawberry is especially suitable for:

• Remove semi-permanent nail polish .
• Remove thin layers of gel .
• To perfect and refine the shape of a construction.
• Work on the underside of the constructed nail.
• Perform precision work on technical products.
  
  

Fine grain with red ring

The red ring identifies the fine grit of the bur. This allows for quick recognition of its abrasion level among the different burs used during service.

The fine grain is especially useful when you need greater control and a gradual removal of the product , as well as for finishing work on construction.

Safety rounded toe

Its conical design ends in a rounded tip , facilitating more controlled work in areas where a more aggressive tip is not necessary.

Even so, it is a professional lathe cutter and should always be used with the appropriate technique, speed, and pressure.

Key advantages

• Professional tungsten carbide milling cutter.
• Conical shape.
• Rounded tip.
• Fine grain.
• Red ring to identify the level of abrasion.
• Indicated to remove semi-permanent nail polish.
• Suitable for removing thin layers of gel.
• It allows for the refinement of the shape of constructions.
• It can be used to clean the underside of the constructed nail.
• Designed for right-handed users.
• Diameter of 6.8 mm.
• Head length of 15 mm.
  
  

Is it for you?

Yes, if you work professionally with a lathe and are looking for a fine tungsten milling cutter for removal and finishing.

It will be especially useful for removing semi-permanent or thin layers of gel and for those jobs where you prefer a more controlled abrasion than that of a medium or coarse grit bur.

It is also an interesting option for perfecting constructions and working on their lower part thanks to its combination of conical shape and rounded tip .

Instructions for use

Correctly place the milling cutter in a compatible professional lathe and select the appropriate speed and direction of rotation for the work you are going to perform.

Work using continuous and controlled movements, avoiding keeping the milling cutter stationary on the same point.

After each service, clean and disinfect or sterilize the bur following the protocol corresponding to the material and the manufacturer's instructions.

Professional advice

Do not apply excessive pressure to try to remove the product faster. With a lathe, control must come from the correct combination of speed, movement, and the abrasiveness of the milling cutter.

The red ring indicates a fine grit , so this router bit is designed for more controlled removal and finishing work. If you need to remove large quantities of construction material, it may be more appropriate to initially use a router bit with a higher abrasive level and reserve this one for the finishing stages.

Also remember that this model is designed for right-handed users . The direction of the flutes on a tungsten carbide end mill affects its performance, so this is an important factor to consider when choosing the tool.

Characteristics

• Brand: Purple Professional .
• Type: Nail drill bit.
• Material: Tungsten carbide.
• Shape: Conical.
• Tip: Rounded.
• Grain: Fine.
• Grain identification: Red ring.
• Diameter: 6.8 mm.
• Head length: 15 mm.
• Orientation: Right-handed.
• Reference: P3034.

Precautions

Product intended for professional use. Use only with a compatible lathe and with adequate technical knowledge.

Avoid applying excessive pressure and always work with controlled movements. Clean and hygienically process the drill between services following the appropriate professional protocol.