WAD Helix Black 7000 RPM Professional Trimmer Machine

The WAD Helix Black is a professional trimmer designed to achieve precision cuts, define contours and perfect hairdressing and barber shop finishes.

Equipped with a 7000 RPM DC motor and DLC-coated steel blades, it allows for detailed work on the nape of the neck, sideburns, beard, and hair contours.

Its metal casing, long-lasting battery, and manageable design make it a practical tool for professionals who need precision and autonomy during the workday.

7000 RPM motor for precision work

WAD Helix incorporates a high-performance DC motor that reaches 7000 revolutions per minute , providing the necessary speed to perform precise cuts and finishes.

It is especially suitable for outlining hair contours, defining sideburns, working on the nape area, and adding details to beards and mustaches.

Its design allows for controlled movements over areas that require precise cutting.

DLC-coated steel blades

The machine has steel blades with DLC treatment , a coating used to improve the hardness and wear resistance of the cutting surfaces.

It offers a cutting length of 0.2 mm, suitable for making close finishes and defining lines and contours.

To maintain its performance, it is important to clean and lubricate the blades following the manufacturer's instructions.

Up to 4 hours of battery life

Its 2000 mAh lithium battery provides up to 4 hours of operation with a full charge of approximately 3 hours.

This autonomy allows different services to be performed without the need to continuously recharge the tool.

The machine includes a charging base that facilitates its placement and recharging at the workstation.

Three guide combs for different lengths

In addition to the 0.2 mm base cut, WAD Helix includes three guide combs that allow you to work at different lengths:

• 1.5 mm: for short cuts and controlled finishes.
• 3 mm: to maintain a short and uniform length.
• 6 mm: for longer trimming jobs.

These accessories expand the possibilities of using the trimmer in barbering and hair maintenance work.

Metal body and manageable design

The machine features a black metal casing, designed to offer a sturdy structure and comfortable handling.

Weighing 220g , it allows for precise work during finishing services.

Its declared noise level is between 58 and 65 dB, according to the manufacturer's technical data.

Key advantages

• 7000 RPM DC motor: suitable speed for professional trimming and finishing.
• Blades with DLC treatment: wear resistance and cutting precision.
• 0.2 mm cut: ideal for outlining contours, sideburns and nape of the neck.
• Three guide combs: lengths of 1.5, 3 and 6 mm.
• Up to 4 hours of autonomy: 2000 mAh lithium battery.
• Charges in 3 hours: charging base included.
• Metal body: sturdy structure with black finish.
• Weighing 220g: comfortable handling for precision work.
• Included accessories: charging base, lubricant and cleaning brush.
  
  

Is it for you?

Yes, if you're looking for a professional trimmer to define contours, work on sideburns and the nape of the neck, or perfect the finish of your haircuts.

It is especially interesting for barbers and hairdressers who need a precision tool with good battery life and different trimming lengths.

It can also be used for personal beard and hair contour maintenance, following the usage precautions.

If you need to perform full haircuts, extensive fades, or remove large amounts of hair, a conventional clipper might be more suitable. Helix is specifically designed for detail work.

Instructions for use

1. Preparation: Check that the battery has sufficient charge and that the blades are clean and lubricated.
2. Length selection: Use the blade without the comb for a close 0.2 mm cut or attach one of the 1.5, 3 or 6 mm guide combs.
3. Power On: Turn on the machine's switch.
4. Trimming: work on the desired areas using smooth, controlled strokes, avoiding excessive pressure on the skin.
5. Contours: Use short strokes to define sideburns, nape of the neck, and finishing lines.
6. Finishing: Turn off the machine and remove any remaining hair from the blades using the included brush.
7. Maintenance: Lubricate the blades according to the manufacturer's instructions and place the trimmer on the base when it needs to be recharged.
   
   

Professional advice

To achieve well-defined contours, work with short strokes and use the blade without the comb when you need a closer finish.

Avoid pressing the machine too hard against the skin, especially in sensitive areas such as the back of the neck and around the ears.

Keep the blades clean and properly lubricated. Regular maintenance helps maintain cutting quality and reduce wear on components.

Cleaning and maintenance

After each use, turn off the trimmer and remove any hair debris with the supplied cleaning brush.

Apply the appropriate lubricant to the blades following the manufacturer's instructions. Avoid using the machine with worn or damaged blades.

Do not immerse the device or its charging base in water. Store it in a dry place and use the compatible charger specified by WAD.

Technical specifications

• Brand: WAD Professional Beauty.
• Model: Helix Black TW004.
• Type: Professional trimmer.
• Color: Black.
• Motor: DC.
• Speed: 7000 RPM.
• Power: 8W.
• Blades: DLC-treated steel.
• Minimum cutting length: 0.2 mm.
• Guide combs included: 1.5 / 3 / 6 mm.
• Battery: 2000 mAh Lithium.
• Autonomy: Up to 4 hours.
• Charging time: 3 hours.
• Adapter input voltage: 100-240V.
• Frequency: 50/60Hz.
• Casing: Metallic.
• Noise level: 58-65 dB.
• Declared lifespan: 800 hours.
• Weight: 220g.
• Included accessories: Charging base, lubricant, cleaning brush and three guide combs.
• EAN: 8436610470285.
• Use: Professional and personal.