WAD Impulse Black 6500 RPM Professional Cutting Machine

The WAD Impulse Black is a professional cutting machine designed to offer power, precision and comfort in hairdressing and barbering work.

Equipped with a 6500 RPM DC motor and an intelligent torque sensor , it adapts the intensity when it encounters resistance in the hair, helping to maintain an even cut even in areas of greater density.

Its DLC-coated blades, adjustment lever, and four included guide combs allow you to perform full cuts, fades, and different styles with a single tool.

6500 RPM motor with torque sensor

WAD Impulse incorporates a carbon brush DC motor that reaches 6500 revolutions per minute .

Its main feature is the motor torque booster sensor, which detects when the hair offers greater resistance to the blades and automatically increases the motor's intensity.

This system is especially useful when working on dense or abundant hair, facilitating a more consistent cut during the service.

High-hardness DLC blades

The machine is equipped with steel blades with DLC (Diamond-Like Carbon) treatment , a high-hardness coating that improves wear resistance.

Its design allows the blades to be removed without the need to remove screws, facilitating access to areas where hair accumulates.

Regular cleaning and lubrication are important to maintain performance and extend the life of the cutting system.

Adjustment lever for cuts and fades

WAD Impulse has a side lever that allows you to progressively modify the cutting height between 0.5 and 2 mm , without needing to change the comb.

This regulation facilitates transitions between different lengths and is especially practical for creating gradients and perfecting finishes.

It also includes four metal-reinforced plastic guide combs, which expand cutting possibilities and allow for greater control.

Up to 3 hours of battery life

Its 2500 mAh lithium-ion battery provides up to 3 hours of operation with a full charge of approximately 3 hours.

This autonomy is practical for performing various hairdressing services without frequent interruptions.

The machine includes a charging base to keep it organized and ready at the workstation.

Metal casing and quiet operation

The WAD Impulse features a metal casing designed to withstand the demands of professional work.

Its weight of 358g provides a feeling of solidity during handling, while the declared noise level, below 60 dB, contributes to a more comfortable user experience.

Key advantages

• 6500 RPM motor: adequate power for professional cuts and fades.
• Torque sensor: automatically increases intensity when it detects resistance to cutting.
• DLC blades: high hardness and wear resistance coating.
• Screwless disassembly: makes cleaning the blades easier.
• Adjustable lever: allows you to adjust the cutting length from 0.5 to 2 mm.
• Four guide combs: made of metal-reinforced plastic.
• 2500 mAh battery: up to 3 hours of battery life.
• Full charge in 3 hours: with charging base included.
• Metal casing: solid design for everyday work.
• Low noise level: less than 60 dB according to the manufacturer.
• Included accessories: charging base, lubricant and cleaning brush.
  
  

Is it for you?

Yes, if you're looking for a professional cutting machine to perform full cuts, fades, and work on hair of different densities.

It is especially interesting for hairdressers and barbers who need a clipper with good battery life, durable blades and a motor capable of adapting its intensity during cutting.

It can also be used for personal hair maintenance, following the safety instructions and using the appropriate comb for each length.

If you need to make very close lines, outline contours or define details of beard and nape, you can complement this machine with a finishing trimmer like the WAD Helix.

Instructions for use

1. Preparation: Check that the machine has sufficient battery power and that the blades are clean and properly lubricated.
2. Length selection: adjust the side lever between 0.5 and 2 mm or attach one of the four included guide combs.
3. Power On: Slide the power switch to the ON position.
4. Cut: Make smooth, controlled strokes, adapting the direction of work to the desired style.
5. Gradients: progressively modify the position of the lever and the guide combs to achieve transitions between lengths.
6. Finishing: Turn off the machine and remove any remaining hair with the included cleaning brush.
7. Maintenance: Lubricate the blades according to the manufacturer's instructions and use the charging base when necessary.
   
   

Professional advice

Use the adjustment lever to work on fade transitions without constantly changing combs. The intermediate positions allow you to perfect the transitions between different lengths.

When working with particularly dense hair, the torque sensor will help adapt the machine's intensity to the resistance encountered.

To maintain an even cut, clean the blades during service if too much hair accumulates and perform periodic lubrication.

Cleaning and maintenance

After each service, turn off the machine and use the included brush to remove any remaining hair.

The screwless detachable blade system makes for more thorough cleaning when needed.

To properly lubricate the blades, follow the manufacturer's instructions and use the appropriate oil. Avoid immersing the machine or its charging base in water.

Store the device in a dry place and use only compatible charging accessories.

Technical specifications

• Brand: WAD Professional Beauty.
• Model: Impulse Black CW004.
• Type: Professional cutting machine (clipper).
• Color: Black.
• Motor: DC with carbon brushes.
• Speed: 6500 RPM.
• Power: 8W.
• Torque sensor: Yes, with increased intensity when detecting resistance.
• Blades: DLC-treated steel.
• Blade removal: No screws.
• Cutting length: Adjustable from 0.5 to 2 mm using a lever.
• Guide combs: 4 units of plastic reinforced with metal.
• Battery: 2500 mAh lithium-ion.
• Autonomy: Up to 3 hours.
• Charging time: 3 hours.
• Adapter voltage: 100-240V.
• Frequency: 50/60Hz.
• Casing: Metallic.
• Noise level: Less than 60 dB.
• Declared lifespan: 1000 hours.
• Machine weight: 358g.
• Charging base weight: 145g.
• Included accessories: 4 guide combs, charging base, lubricant and cleaning brush.
• EAN: 8436610470100.
• Use: Professional and personal.